OVENS AND PAINTING CABINS
#1
PAINT BOOTH WITH WATER CURTAIN
Clean air must be injected during the painting process, for this reason the paint booth has a pre-filtering system in the suction of the injection fan, and also has a filter unit of the HL100 type in its upper part, which retains particles that may enter from the outside.
At the same time, the gases must be evacuated, for this reason the cabin has a high-flow extractor fan, which maintains 20% of the air that enters, in order to pressurize the interior of the cabin.
At the same time, the gases must be evacuated, for this reason the cabin has a high-flow extractor fan, which maintains 20% of the air that enters, in order to pressurize the interior of the cabin.
#2
PAINT POLYMERIZATION OVEN
IMAD has designed a hot air injection system that provides a high quality of curing, brightness and hardness in the entire area of the piece that enters the equipment.
#3
PAINT BOOTH WITH PRESSURIZATION, EXTRACTION AND HEATING
The positive pressurization of the cabin is achieved by means of a high flow fan which injects air and leaves the work area free of contaminating particles before starting the painting process.
#4
PAINT POLYMERIZATION TUNNEL
Powder coating is an economical solution for coating a wide variety of products. Electrostatically applied and oven cured, the process produces a durable, high-strength finish with minimal impact on the environment. One of the most important aspects in this equipment is the handling of hot air to guarantee polymerization temperatures.
